JiangShan

Quick Connecting PPR Tee

Material: Polypropylene R200P
Pressure: PN1.25 PN1.6 PN2.0 PN2.5 MPa
Outer Diameter: 20mm-160mm
Standard: GB/T18742.3-2002
Certification: ISO9001
Temperature: -20-95 ℃
Color: White, Gray, Green
Connection Method: Socket Heat Welding

PRODUCT DESCRIPTION

Features:

1. Simple operation and easy installation

2. The inner wall is smooth without dirt

3. There is no need to use a hot-melt machine for hot melting. It can be installed quickly and can be recycled

4. Although quick connecting tee can prevent water leakage in the short term, there is a defect in choosing the quick connector, that is, it can only choose the exposed pipeline, and cannot be used in the concealed pipeline. And after the connection is successful, the water pipe and the joint can be flexibly rotated, and it is not particularly convenient to use in some occasions.

5. Some have tee connections inside, and faucets need to be installed. However, due to the effect of gravity, although the installation is convenient, if the water pressure increases later, there will still be troubles of water leakage.

6. There are also standard requirements for installation joints. First, you need to choose the appropriate pipe material, and you need to saw the water pipe interface very smooth and smooth, without burrs. If there is unevenness, the seal will not be tight, and water leakage will occur later.

7. Next, you need to install the water pipe with force to the end, both ends must be sealed well, and sealed with a sealing ring, so as to achieve the purpose of waterproofing. However, if you choose a PPR quick connector, it cannot be used outdoors, because it is easy to age under the sun, and it is easy to leak in the later stage.

PRODUCT DETAILS

GET A FREE QUOTE NOW

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

TECHNICAL PARAMETER

Item: PPR compression couplerApplication: Water
Size: 20 mm, 25 mm, 32 mmMax.Temp: -20C to +120C
Material: PP, PPR
Working Pressure: 30bar/435psi
Connection Type: Quick joint, Push in connection
Standards: EN13828, DIN16962, ISO15874

FAST ANSWER YOUR QUESTIONS

We’re one plastic pipe and fittings manufacturer.

All our product following the ISO and CE standard.

Yes, free samples is available, but need you pay the air freight in advance, or we can send to your Express account.

We have strong QC team to control the product quality.

Water and sewer PE Pipe / Fittings,HDPE Double Wall Corrugated Pipe,UPVC Pipe / Fittings, Electric cable pipe/Conduit, PPR Pipe / Fittings,PE-RT Pipe.

Request A Quote

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.